SIDE BY SIDE RACES, DOUBLE ELIMINATION, 4×4 TRUCKS AND KIDS ATVS
*100% PAY BACK*

Classes

  • Street Diesel-$25
  • Factory Stock-$25
  • Stock-$25
  • Altered Stock-$30
  • Iron Headed Super Stock-$30
  • Super Stock-$30
  • Pro Stock-$30
  • Consistency-$10
  • Open Truck – $40
  • Kids ATV (15 and under)-free

Race Dates

  • Saturday July 15 (Hancock County Fair)
    • Check in 2:00-4:30pm
    • Start Time 5:00pm
    • $4500 added money

Contact Information: Jon Cooper 309-333-9849
Rules can be found below or on the Hancock County Fair Facebook Page, They are the same as OMRO

2022-2024 Stock Rules

Stock class is intended for trucks and jeeps that are primarily street
driven, have minimal modifications, and are street legal. Engine,
frame, and body must be of the same make.

BODY:
1. Stock steel body
2. Wheel base must bee stock for frame and body
3. Firewall cannot be cut, relocated, or reshaped
4. Must retain factory floor plan
5. Flatbeds must meet tech approval ( must be same width as cab,
extend to rear most part of the and be substantial enough to
carry cargo)
6. Must retain factory stock glass
7. Headlights and taillights required and must be functional
8. Front bumper required
9. Interior cannot be gutted
10. Fuel cells allowed, but must retain factory tank

CHASSIS:
1. Full uncut factory frame front to rear unmodified OEM factory
from bumper to bumper
2. Minimum 4 point roll cage for open top vehicles
3. Suspension must be stock (lift kits allowed)
4. No removal of leaf springs
5. Front and rear differentials, transmission and transfer case can
be upgraded with stronger OEM parts (must be same make)
6. Trans brake and stall converters are not allowed. Will be
checked by techs discretion.

7. Fuel tank, battery, and radiator must be in stock location
8. Unaltered D.O.T. tires only
9. 4 wheel brakes, dual master cylinder required

ENGINE:
1. No Diesels
2. Must pull 18” vacuum st 850 rpm
3. No V8s in mini truck or mini SUVs ( unless OEM)
4. Motor must be located in stock location
5. No aluminum engine blocks or aluminum heads ( unless OEM )
6. OEM fuel injection only
7. Engine limited to one of the following external modifications
(except big block in half tons)
a. Single gas carb limited to 4150/4160 dual fed vacuum
secondary’s ( no predators, dominators, no splits, no
stretched)
b. Aluminum intake only ( no tunnels rams or sheet metal
intakes)
c. headers/ mufflers are required and exhaust must extend to
behind the driver’s seat
d. Straight pips must be extended to back of cab
8. No aftermarket ignitions (MSD, Mallory, etc.)
a. NO HEI style distributors on Ford, Dodges, etc.
b. No rev limiters
9. No electronic fuel pumps ( unless OEM )

2022-2024 FACTORY STOCK RULES

Factory stock is meant to be a beginner’s class with no modifications.
This class is designed for spectators to be comfortable racing in their
daily driver. It’s not meant for trucks that have been built for this
class. Building a factory stock truck is not acceptable and will not be
tolerated. IF the officials believe that s truck has been built for this
class it will not be allowed to run in factory stock and will have to
move up to the next class. Winning 1st place 2 consecutive times will
cause the truck to move up to the next class for participation in the
next race. Decisions of the officials on this matter (as all OTHER) are
final and not up for discussion. THIS WILL NOT BE A POINTS CLASS.

BODY:
1. Full factory steel body
2. Heater core and a/c lines must be hooked up
3. A/c compressor and belts must be hooked up
4. Front and rear bumpers required
5. Headlights and tailgates required and must be functional
6. No floor shifters
7. No gutting
8. No aftermarket modifications
9. Must provide valid registration (no dealer plates ) proof of
personal auto insurance, and must be driven in the gate
10. Beds must be cleared of all debris prior to racing. Any trash
lost during the race will result in a loss for the driver.

CHASSIS:
1. Stock trucks with no automatic transmission must use stock
torque converters ( no vega converters, etc.)
2. Maximum stall of 1800 will be checked
3. Suspension must be stock no traction control devices
4. Tires must be D.O.T. approved no cuts

ENGINE:
1. Factory stock gas ( no engine swaps, no diesels.
2. Must pill a maximum of 20’’ of vacuum at 850 RPM
3. Full factory exhaust to rear of the truck including mufflers
4. No aftermarket ignition (msd, mallory, etc.)
5. Aftermarket air filters allowed
6. No carb spacers. If a truck came from a factory with points, it
can’t be changed to electronic ignition.
7. All parts including carb and distributor, must be stamped by
Ford, GM, etc.
8. No performance programmers or chips allowed. Will be checked
at officials discretion.
9. No cooldown time is allowed in factory stock class

2022-2024 modified stock rules

Modified stock class is intended for trucks and jeeps that have been
slightly modified for competition but still utilize mostly stock components.
They must be capable of being street legal. Engine swaps allowed, but
frames must be correct for the body.

BODY:
1. Stock steel body ( minimal cutting allowed for tire clearance and
headers)
2. Wheel base must be stock for frame or body( no mini trucks on full
size frames)
3. Firewall cannot be cut, relocated, or reshaped.
4. Must retain factory floor pan.
5. Flatbeds must meet techs approval ( must be same width as cab,
extend to rear of the frame, and be substantial enough to carry cargo)
6. Must retain stock glass, if running a cage through the back glass you
may replace back glass with lexan.
7. Headlights and tailights are recommended.
8. Front bumper required
9. No interior gutting
10. Fuel cells allowed
Engine:
1. Motor must pull 17” of vacuum at 850 RPM’s
2. Engine swaps allowed ( ford on ford chevy on chevy etc.)
3. No aftermarket blocks or heads
4. No aftermarket ignition ( MSD MALLORY ETC.) no HEI distributors on
ford or dodge ETC, No rev limiters
5. No V8 in mini trucks or mini suvs Big blocks in full size trucks only.
6. Motor must be in stock location
7. No aluminum heads ( unless OEM)
8. Single gas carb limited to 4150/4160 ( no predators, dominators, no splits
or stretched)

9. OEM fuel injection only
10. Aluminum intake allowed ( no tunnel rams or sheet metal intake)
11. Headers allowed
a. Mufflers required unless running cast iron manifolds maximan 2.5”
exhaust pipe.
b. No straight through mufflers must be offset.
c. No collector extensions
d. No electric cutouts on exhaust or electronic devices
e. Must come off collector with 2.5” pipe or muffler
12.electric fans as secondary cooling only.
13. No electric water pumps
14. No oxygenated fuels, no nitrous, or alcohol
Chassis:
1. Full factory frame front to rear
2. Minimum 4 point cage for open to vehicles
3. No traction control devices
4. Front and rear differentials, transmission, and transfercase can be
upgraded with stronger OEM parts( must be same as make)
5. Lift kis allowed
6. Minimum of 4 leafs on rear springs
7. No adjustable shocks
8. No trans brakes
9. Max. stall 1800 checked at techs discretion
10. Battery and radiator must be in stock location
11.4 wheel brakes and duel master cylinder required
12. Unaltered DOT tires only no cuts

2022-2024 PRO STOCK RULES

Pro stock class is for highly modified stock appearing, four wheel drive,
race vehicles. Altered frames, race bodies, and high performance race
engines allowed. Side by side double elimination.

BODY:
1. Any style jeep or truck allowed – must be recognizable
2. Fenders and roof must be retained if originally equipped
3. No narrowing of the body from the back of the cab (driver
compartment) forward
4. Narrowing or bobbing the rear quarter panels allowed for tire
clearance
a. Rear quarter panels must extend a minimum of 12” behind the
cab if not narrowed
b. If narrowed must extend to the end of the frame
5. Body must extend to the end of the frame
6. A firewall and floor plan must be present protecting the driver from
engine and driveline components
a. Minium 16 ga. Steel or 0.60 aluminum (0.129 recommended)
aluminium required
b. Firewall will extend from dore to door and from floor pan to
base of windshield.
c. Floor pane will extend from door to door and front of cab or tub
(NOTE: floor pan and firewall shall be securely attached to each
other and to the framework of the chassis)

7. Center seat if acceptable – must be located no more than 84” from the
center of the front axle to the bottom of the seat back.
8. Windshield not required
9. Kill switch at the rear of the bumper (must kill fuel and ignition)
10. 5 point harness

CHASSIS:
1. Main frame rails can be constructed from a minimum of 2×3 rectangle
tubing and must be a minimum of 0.080 wall of the thickness
2. No round tubing or ladder style frames allowed
3. Minimum 8 point cage required
4. Any type of suspension allowed
5. Any style OEM aftermarket chain or great drive transfer sets allowed
6. Duel independent master cylinder brake system required
7. 4 independent wheel brakes required
8. D.O.T. tires and alterations – cuts allowed
9. 3000 lbs big blocks, 2700 lbs small blocks
10. Maximum wheelbase 130”

ENGINE:
1. Any automotive type engine acceptable
2. Engine must be located with #1 spark plug no more than 16” behind
the center of the front axle tube
3. Big blocks aluminum engine not permitted
4. Small blosh aluminum engine blocks allowed
5. Any type of cylinder head engine and intake manifolds allowed
6. Maximum od 4 barrels of carburetor with a maximum of (2) fuel
bowels (Split and stretched Dominators allowed, single predators
only)
7. Vacuum pumps and dry sumps allowed
8. Racing gas or E85 only (no methanol, ethanol, or nitro methane
allowed)
9. No power fuel additives allowed

2022-2024 SUPER STOCK RULES

This all motor class is intended for four wheel drive trucks and jeeps that has been modified for competition but still utilize stock OEM components. Although they are primarily competition vehicles and need not to be street legal. Engine swaps and body swaps are allowed per class rules.

BODY:

1. Any model jeep or truck, stock steel body, or OEM equivalent fiberglass body
parts required, ( No race bodies, fiberglass replacement parts should closely
match the OEM specs in design)
2. Body must match wheelbase
3. Shall retain full cab, tub, and doors.
4. Tailgate may be removed
5. Fender cutting and trimming permitted for tire and header clearance
6. Firewall may be modified for engine clearance only but not replaced or relocated
7. Shall retain factory floorpan. Floor pan or tub shall not be removed, replaced, or
relocated. ( floor may be modified for driveline clearance)
8. Flatbeds ok. If running bed skins must have floor capable of holding 250# bed
floor must as wide as the frame rails
9. Windshield and side glass required. Lexan or equivalent acceptable. Rear window may be removed for roll bar clearance.
10. Headlights and taillights are not required
11. Bumpers not required
12. Mirrors not required
13. Interior gutting allowed. No removal of inner steel structures or panels allowed
14. Race seats and 5 point harness required
15. Driver shall sit in stock position, NO center seat position.

CHASSIS:
1. Any unmodified OEM frame to frame rails bumper to bumper. Shall retain 2 stock cross members. ( relocating of stock cross members allowed, modifications
allowed) unused crossmembers and brackets may be removed.
2. A 6 point roll cage is required
3. Rear suspension should be leafspring unless equipped otherwise from factory
4. Ladder bars allowed NO 3 LINK OR NO 4 LINK SUSPENSIONS
5. Front suspension leaf spring, coil & radius, or IFS. ( other front suspensions styles will be permitted if OEM for that vehicle. Aftermarket radius arms allowed.
6. No coil over suspensions
7. Leaf spring vehicles shall have at least one functional leaf spring per spring pack. Floaters and sliders allowed
8. Any OEM front and rear diff allowed
9. Any OEM transmission allowed. ( modifications and trans brakes allowed) should be shielded stock steel floor acceptable)
10. Fuel cell battery and radiator may be relocated. Must run kill switch at the rear bumper. Must kill ignition and fuel
11. Brakes are required on both front and rear axles.( pinion brakes allowed) dual master cylinder or OEM style dual reservoir master cylinder required.
12. Max. 46.5 unaltered DOT tires. NO CUTS
13. Minimum weight with driver
a. Big block trucks 3600lbs.
b. Small block trucks 3300lbs

ENGINE;
1. Any factory OEM type automotive engine. No aluminum blocks allowed unless its factory OEM installed engines
2. Number 1 spark plug must be inline or in front of the ball joint
3. Conventional OEM style aftermarket heads allowed
4. No aftermarket prostock style heads permitted ( no Chevy big block spread port style heads. No ford c-heads or thor head. No hemi style heads allowed
a. Ford A-460 heads allowed
b. Any aftermarket OEM type small block aluminum head allowed
5. Cast aluminum intake allowed. ( no tunnel rams or sheetmetal intakes)
6. Single gas carb only ( No stretched or split dominators) single predators or sv-1 carb allowed
7. OEM fuel injection only
8. Vacuum pumps and dry sumps allowed
9. Race gas or E-85 allowed. No alcohol or ethanol. Oxygenated fuels allowed
10. NO power adders NO nitrous NO superchargers NO turbochargers
11. Competition exhaust allowed

2022-2024 Powder puff rules

Factory stock trucks only Females only
This is a non points class

DIESEL:

  1. Factory stock diesel only
  2. Performance programmers and chips allowed
  3. Full factory steel body with front and rear steel bumpers
  4. Must have exhaust and pipe extending past the rear of the cab
  5. Trucks with auto transmission must use stock torque converters

2022-2024 Altered Stock Rules

Altered stock is intended for trucks and jeeps that have been slightly modified for competition but still utilize mostly stock components. Engine swaps allowed, but frame must be correct for the body.

BODY:
1. Stock steel body fiberglass hoods allowed.( minimal cutting for tire and header
clearance only)
2. Wheel base must match body
3. Firewall can be reshaped minimally, but not cut\relocate
4. Must retain factory floor pan
5. Flatbeds must meet techs approval ( must be same width as the cab, must extend to the rear of the frame and be substantial to carry 250#)
6. Must retain stock glass unless running a cage through the back glass then you
can replace the back glass with lexan.
7. Headlights and taillights recommended
8. Front bumper required
9. No interior gutting
10. Must have 2 seats securely mounted
11. Mini trucks allowed SMALL BLOCK ONLY

CHASSIS:
1. Full factory frame must match body ( must retain 2 stock cross members but can
be relocated)
2. Minimum 4 point roll cage required
3. Suspension must be stock pickup design
4. Kill switch at the rear bumper( must kill fuel and ignition)
5. Four point harness five point recommended
6. Ladder bars allowed
7. No 4 link, 3 link, floaters, or coil over shocks
8. Any stock front and rear differentials allowed
9. Any stock tranfercase allowed
10. Radiator must be in stock location
11. Transmission modifications allowed( Ford on Ford Chevy on Chevy etc.)
12. No trans brakes
13. 4 wheel brakes, dual master cylinder required
14. Unaltered DOT approved tires only – no cuts

ENGINE:
1. Must pull 14” of vacuum at 850 RPM’S
2. No vacuum pumps allowed
3. Engine must be in stock location
4. No aluminum blocks or heads
5. Single gas carburetor
6. OEM fuel injection only
7. Aluminum intake only( no tunnel rams or sheet metal intakes)
8. Open headers allowed- no uprights
9. No nitrous or alcohol

2022-2024 IRON HEAD SUPER STOCK

This class is intended for trucks and jeeps that have been slightly modified for
competition but still utilize mostly stock components. Engine swaps allowed but frame must match body.

BODY:
1. Stock steel body may run a fiberglass hood ( minimal cutting for tire and header clearance)
2. Wheel base must match the body
3. Firewall can be reshaped but not relocated or cut
4. Must retain factory floor pan
5. Flatbeds must meet techs approval and be capable of carrying 250# of cargo. Must be as wide as the cab and extend to the rear of the frame
6. Must retain stock windshield but all other can be lexan or equivalent
7. head lights and taillights recommended
8. Front bumper required
9. No interior gutting
10. Must have 2 seats securely mounted
11. Mini trucks allowed- SMALL BLOCK ONLY

Chassis:
1. Factory frame must retain 2 stock cross members but may be relocated
2. Minimum 4 point roll cage
3. Suspension must be stock pickup design
4. Kill switch at rear bumper must kill fuel and ignition
5. 4 point harness 5 point recommended
6. Ladder bars allowed
7. No 4 link 3link, floaters, or coil over shocks
8. Any stock front and rear differentials
9. Radiator must be in stock location
10. Transmission modifications allowed ( Ford on Ford Chevy on Chevy etc.)
11. No trans brakes
12. 4 wheel brakes duel master cylinder required
13. Unaltered DOT tires- no cuts

ENGINE:
1. Vacuum pumps allowed
2. Engine must be in stock location
3. No aluminum heads or blocks

4. Single gas carb
5. OEM fuel injection only
6. Aluminum intake only( NO tunnel rams NO sheetmetal intakes)
7. Open headers allowed- no uprights
8. No nitrous or alcohol

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt